10 Tips for Choosing Bathroom Tiles
Planning the tile arrangement well can help in the process of arranging, placing, and determining what equipment is needed. Poor planning will definitely not produce perfect results.
1. Plan carefully. To get the most perfect result, you have to plan every detail in great detail. Do you want a shower, bathtub or even excess? Everything must be planned in advance. Also make sure that supporting things like electricity are arranged neatly behind the bathroom wall. Other details such as medicine cabinet, lights for bathroom glass, and exhaust must be prepared from scratch.
2. Check the tile size again. The biggest mistake we make is choosing the wrong tile size. You should buy a sample of the tile you want to use and try placing it in your bathroom, then soaking the tile in water to ensure quality.
3. Arrange the tiles from the bathroom roof to the floor. Most bathroom floors require a tile that must be cut to fill in the gaps between the wall and floor. By arranging the tiles from the roof to the floor it will be easier for you to avoid cutting tiles for gaps at the bottom. Make sure to create a design on the bathroom wall before laying the tiles onto the wall.
When you want to make a linear or elongated bathroom drain, make sure the water gap that is created flows directly into the main water channel so that the water can flow properly and does not stagnate in the linear gap.
4. Be careful when laying tiles near windows and doors. The arrangement of tiles near windows and doors is very important to note. It is a little difficult to apply a waterproof system to the tiles near the door or window. Make sure the waterproof system that is applied to your bathroom is well designed so that you can prevent water from getting into the tiles or window frames.
5. Make drains well. Placement of drains in the bathroom must be considered and requires proper planning. Once you’ve determined the position of the drains you want, experiment with spilling a large amount of water in the bathroom so you can see if your drains are working properly.
6. Leak-proof protector. Create a dividing tile between the shower room and the dry bathroom space like the picture above. With an extra tile arrangement arranged around the glass dividing the shower door and dry area can be a tip for you to avoid running water into dry areas.
7. Caution for floors that use gravel. When you design a bathroom using a floor made of gravel, it must be remembered that this type of floor takes longer to absorb water. The distance between the stones as wide as half to one centimeter can be one way to absorb water faster. The use of epoxy paint can also help absorb water while you are showering.
Tips for Choosing Bathroom Tiles
8. Pay attention to each installation step. Stacking tiles with natural stone can enhance the look of your bathroom. You can pre-experiment on a plank and let it dry before you tackle the entire bathroom. Let the bathroom floor dry for a few days after installation, then close the gaps between the tiles. Each step takes several days for it to dry.
9. Details can change the appearance, Choosing Bathroom Tiles. Good design and attention to other small details make a bathroom look neat and seamless. For example, using a different tile design to separate the shower from the dry area.
10. Make the design of the soap holder on the bathroom wall wider. When designing a soap holder on the shower wall of your bathroom, the first thing you have to determine is how much you want the size result to be. However, when working, make the size bigger about 2 to 5 cm. This will set you back when tiling your bathroom.